Ceramic Coating Kent logo
Deep blue SUV in a detailing bay with tight water beads on its freshly coated hood and long LED light panels reflected in the paint

Free ceramic coating referral line for Kent, WA

Tesla PPF and Ceramic Coating in Kent, WA

  • Typical cost: the carmaker's own accessory shop lists installed film packages from $400 to $6,500, by vehicle and coverage; KBB puts front film plus a coating under $2,500.
  • Small kits: a $50 film kit for the lower rear doors of a Model Y, sold by the carmaker.
  • After film goes on: the carmaker's kit instructions say a dry, warm day to install, then no wash or rain for 24 hours.
  • Cybertruck: its stainless panels have no clear coat, so scratches are in the steel itself.

Ceramic Coating Kent carries your film question to one nearby shop that can quote film for a Model Y, a coating for a Model 3, or the right products for a Cybertruck. Give us the model, year and color and what you want covered, and we pass it along.

Tesla PPF and Ceramic Coating by Model, Plus Other EVs

The film and the coating are the same products used on any car; paint protection film covers what they are. What changes by model is which panels get hit, what the carmaker's manuals allow, and on one truck, whether there's paint at all.

Clear protection film being fitted low on the rear door of a white unbadged electric crossover

Model Y and Model 3: Full Front vs Full Body

The carmaker sells its own small film kit for the Model Y: two pieces for the lower rear doors and fenders, $50 retail, pitched against snow, salt, sand and stone chips. The Model 3 kit's instructions put the film on the rocker panel and say to keep it off the body line where the rocker meets the rear quarter. Those kits cover a strip. For the hood, bumper, fenders and mirrors, compare full front PPF with full body PPF.

  • Low panels ahead of the rear wheels: the carmaker's own kit area
  • Front end: hood, bumper, fenders, mirror caps
  • Whole car: every painted panel

Model S and Model X

The Model S service manual shows how involved rear film can be: to retrofit film on the rear quarter panels, the technician raises the car, removes the rear wheel and pushes the wheel-arch liner aside. The film lines up with the rocker body line, and about 10 mm wraps around the edge. We found no matching carmaker film procedure for the Model X, so ask the shop for a panel-by-panel coverage list.

Cybertruck's Stainless Panels

The Cybertruck is a different job. Its owner's manual says the stainless steel body has no clear coat, so scratches are in the steel panels, and repairs follow a refinishing procedure in the carmaker's collision manual. Paint correction in the usual sense doesn't apply. The manual also says:

  • Wash: pH-neutral car shampoo and a soft sponge, by hand
  • Automatic washes: not recommended by the carmaker
  • Spills: remove acidic or non-pH-neutral substances right away
  • Spots: orange or brown marks are surface contamination, not rust

One film maker recommends its satin film on brushed metal, where clear film adds gloss, and the carmaker's accessory shop offers film options for this truck. A coating should be one its maker rates for bare metal.

Rain beading on the coated side window and dark glass roof of a white electric crossover

Glass Roofs, Screens and Interior Surfaces

The manuals set limits a shop should follow. Hydrophobic glass coatings go on the side and rear windows only, never the windshield, which may affect the driver-assist cameras. Glass gets an automotive glass cleaner and nothing abrasive. Inside, the touchscreen gets a display cloth, with no glass cleaner or alcohol gels, and the top of the dashboard is never polished because a shiny surface can reflect into your view. For the products themselves, see windshield and glass coating and interior ceramic coating.

Rivian and Other EVs

Rivian offers film as a factory-installed accessory on select vehicles and a satin film package on select R1 trims. Its collision guidance adds two cautions that apply to many EVs: unauthorized film, stickers or plates that block the front cameras or radar can switch off driver-assist features, and if panels come off during the install, the sensors may need calibration. For R1T pickups and other trucks, see truck and SUV ceramic coating.

Gloved hand wiping ceramic coating onto a black car door with a suede-wrapped foam applicator under a bright inspection light

Why Kent car, truck, boat and RV owners call Ceramic Coating Kent

  • Sending a request costs you nothing, and you decide whether to book
  • It reaches one independent local shop, never a list of bidders
  • Ask for a paint-depth reading and an inspection before correction is priced
  • Ask which coating goes on and whether the maker has the warranty registered
  • Plan for a week or two without washing while the coating cures

Get a free ceramic coating estimate

Free for car, truck, boat and RV owners. One local shop contacts you.

Tesla PPF Cost and the Delivery-Day Check

The carmaker's accessory shop lists installed film packages from $400 to $6,500, from a wear-and-tear set to a full body, and notes that pricing varies by vehicle and coverage. Kelley Blue Book's general figures line up: front film plus a coating under $2,500, about $4,000 to $7,000 for full film. A professional coating alone runs about $500 to $2,000 nationally. List prices and national averages only go so far; the figure for your car comes from the shop once it has inspected the paint.

Start at delivery. Look the paint over in daylight before you sign, since film and coating both seal in whatever is there; new car paint protection covers that check. You'll also read online that EV paint is softer than other cars'. We looked for a measurement and didn't find one we'd stand behind, so we don't price a job around it.

Once the car is filmed or coated, the owner's manual rules still apply: hand wash with a mild car shampoo, touchless automatic washes only, nothing with hydroxide or above pH 13, and a pressure-washer nozzle at least 12 inches from the surface. Winter road salt is its own topic, covered on wheel and caliper coating.

Frequently asked questions

We pick up a Model Y next month. When should the film go on?

Soon after delivery, once you've checked the paint. One film maker recommends protecting a new vehicle as early as possible, and film over an existing chip or swirl seals it in. Inspect the paint in daylight at pickup first. The carmaker's own film instructions ask for a dry, warm day and no wash or rain for 24 hours afterward.

Can the windshield get the same water-repellent coating as the side windows?

The carmaker says no. Its owner's manuals say to put hydrophobic coatings only on the side and rear windows, not the windshield, because a coating there may affect what the driver-assist cameras see. The same manuals warn against windshield treatment fluids, which can make the wipers chatter. Ask the shop to leave the windshield uncoated.

The Cybertruck has no paint. Is a coating or film still worth considering?

It can be, with different products. The stainless panels have no clear coat, so a scratch is in the steel, and the carmaker routes repairs through a refinishing procedure. One film maker recommends its satin film for brushed metal, and the carmaker's shop offers film for Cybertruck. Ask what product is rated for bare stainless steel.

Ready to get started in Kent?

Tell us about the job and a local ceramic coating shop will get back to you with a free estimate.

Get a free ceramic coating estimate

Free for car, truck, boat and RV owners. One local shop contacts you.