Truck and SUV Ceramic Coating and Film Options
A truck has a bed, more textured plastic, and in many cases a job that throws gravel at it. These are the setups a shop will ask about.

Full-Size Pickups: Cab, Bed Sides and Tailgate
Most of a pickup quote is surface area. The cab, the bed sides and the tailgate are all painted panels, and polishing time scales with them, which is where the extra hours in the summary above come from.
- Product: one maker's coverage chart allows a 50 ml bottle for one full-size vehicle, about one and a half times a mid-size car's share.
- What to ask: whether the quote covers the bed sides, tailgate and a painted bed floor, or only the cab.
Three-Row SUVs and Large Crossovers
Big SUVs add roof area, and many carry textured black trim. The roof is paint you rarely see but still pay to have polished and coated. Textured plastic trim is restored and coated as its own job; see trim restoration. Film labor scales with size the same way: Kelley Blue Book's vinyl wrap table, a close cousin of film work, runs $3,500 to $5,000 for a large SUV.
Lifted Trucks and Jeeps: Rock Rash and Rockers
Off-road driving is the case Edmunds singles out for 10-mil film instead of the standard 8-mil. Standard front film covers the hood, bumper, fenders and mirror caps; rocker and rear-arch pieces are add-ons listed on the full front PPF page. Fender flares on many Jeeps are textured plastic, which a paint coating won't bring back if it has already faded.
Bed Rails, Liners and Tonneau Covers
These parts aren't paint, and their makers have their own rules.
- Spray-in liners: Rhino Linings says its liners wash with a hose and car soap, even a pressure washer, and that long UV exposure can fade them; it sells its own UV topcoat for that.
- Soft tonneau covers: TruXedo warns against vinyl conditioners with silicone, petroleum or citrus additives, which can crack and shrink the vinyl.
- Washing: RealTruck's advice for covered beds is to avoid spinning-brush car washes and decline the spray wax at a touch-free wash.
Tell the shop what's on your bed, so the quote says which parts it coats and which it leaves alone.

Work Trucks That See Gravel and Job Sites
A work truck takes chips daily. Edmunds names work sites as a reason for 10-mil film, and Ford's paint warranty doesn't cover stone chips, so the hood and bumper are where the money goes. If the truck belongs to a business, check the coating warranty before you book: at least one maker won't cover company vehicles, as the fleet page explains.

Why Kent car, truck, boat and RV owners call Ceramic Coating Kent
- Sending a request costs you nothing, and you decide whether to book
- It reaches one independent local shop, never a list of bidders
- Ask for a paint-depth reading and an inspection before correction is priced
- Ask which coating goes on and whether the maker has the warranty registered
- Plan for a week or two without washing while the coating cures
Why Size Changes a Truck or SUV Quote
One product maker's cost guide names four price drivers: vehicle size, how much correction the paint needs, the coating tier and warranty length, and the shop's location. On a truck the first two stack. More paint means more polishing hours, and correction on neglected paint can double a quote. The coating tiers themselves are on the homepage cost table.
Polishing
the biggest time difference, since every extra panel adds machine hours.Product
about one and a half times a mid-size car's coating for a full-size vehicle, per one maker's chart.Film
KBB's wrap table puts a pickup at $3,200 to $5,000 against $1,800 to $2,500 for a small car, a rough guide to how film labor grows.
Treat these as markers from car media and product makers. Nobody can firm them up for your truck without walking around the paint, the bed and the trim.
Film on the Front and Rockers vs a Coating Only
A coating won't stop a chip; that's covered on the paint protection film page. So the choice comes down to where the truck goes.
Mostly pavement
a coating over the whole truck for easier washing, and front film if highway chips bother you.Gravel, dirt or job sites
10-mil film on the hood, bumper and rockers, with a coating over the rest.Winter roads
Kent treats icy roads with salt-based anti-icer, so the underside and wheels need washing too; see wheel and caliper coating.
Ask for film and coating as separate lines on the quote, with the film thickness written down.
