Ceramic Coating Kent logo
Deep blue SUV in a detailing bay with tight water beads on its freshly coated hood and long LED light panels reflected in the paint

Free ceramic coating referral line for Kent, WA

Trim Restoration and Coating in Kent, WA

  • Typical cost: no cost guide we found prices trim work as its own job; trim coating kits sell from about $35 a bottle at one maker's list price, so most of a quote is prep and labor.
  • How long it lasts: one maker says a trim dressing typically lasts several weeks; trim coatings are sold as lasting up to 2 years, or 200 washes under one maker's guarantee.
  • Before it gets wet: 1 hour on one product's instructions, 12 hours on another's.
  • Conditions: one maker asks for at least 41°F and a cool panel out of direct sun.

Ceramic Coating Kent makes the introduction to a local shop for the gray, chalky plastic on your bumpers and mirrors. Mention which pieces have faded and whether anything has been dressed recently, since old dressing has to come off first.

Trim Restoration and Coating by Trim Type

"Trim" covers five different materials on most cars, and each takes a different product. A good quote names the pieces.

Gloved hand applying a trim coating to faded textured black plastic on a car's rear bumper

Faded Black Textured Plastic

Sun and weather leave unpainted black plastic gray and chalky. A trim coating bonds to the plastic, brings the color back and protects it, where a dressing only sits on top. The prep is the job: one maker calls for an all-purpose cleaner and a medium-stiff brush to scrub off old dressing, then a coat worked into every crevice, with a second coat after the first cures for more durability. One caution from another maker on brand-new textured plastic:

  • Dealer dressing: a high-silicone dressing applied before sale can stop the coating from bonding
  • New plastic: the maker suspects plastic can "gas out" for about a year, leaving dull spots under the coating
  • No easy undo: it says polishing a coating off textured plastic without changing its look is nearly impossible

Rubber Seals and Weatherstripping

Door, window, hood and trunk seals are rubber, not plastic, and they fail by drying and cracking. Seal conditioners are sold to keep them pliable, and some trim coatings list rubber among their surfaces. Ask which one goes on the seals, since a conditioner gets reapplied and a coating doesn't.

Piano Black Gloss Trim That Scratches

Gloss black pillars and window surrounds are usually plastic under a very thin clear varnish, and one detailing retailer calls the material extremely soft. Wiping dust off dry is enough to leave fine scratches. A coating makes the surface slicker and easier to wash without rubbing, but it doesn't make it scratch-proof (the graphene coating page explains why "9H" isn't scratch-proof). For trim that gets touched, clear film is the other option. Interior piano black is on the interior coating page.

Chrome and Bright Trim

Most chrome on a car is decorative plating, thin and layered over steel or plastic. One product maker warns that aggressive abrasives can scratch it or wear through to the metal underneath, and asks for a test spot first. Plastic with a chrome look isn't magnetic, which is one way to tell. Some trim coatings list chrome among their surfaces; one wheel coating says chrome is fine but polished bare metal isn't. Ask what the shop will polish chrome with before it's coated.

Cowl, Bumper and Fender-Flare Plastics on Trucks and SUVs

Trucks and SUVs carry far more unpainted plastic: cowls, bumper caps, fender flares, step pads. One maker sizes its trim coating at 15 ml for a small sedan and 30 ml for an SUV, and lists bumper trim and fender flares by name. More on bigger vehicles is on the truck and SUV page.

Gloved hand wiping ceramic coating onto a black car door with a suede-wrapped foam applicator under a bright inspection light

Why Kent car, truck, boat and RV owners call Ceramic Coating Kent

  • Sending a request costs you nothing, and you decide whether to book
  • It reaches one independent local shop, never a list of bidders
  • Ask for a paint-depth reading and an inspection before correction is priced
  • Ask which coating goes on and whether the maker has the warranty registered
  • Plan for a week or two without washing while the coating cures

Get a free ceramic coating estimate

Free for car, truck, boat and RV owners. One local shop contacts you.

Trim Dressing vs Trim Coating: How Long Each Lasts and What It Costs

A dressing is a wipe-on shine that wears off. A trim coating is a thin layer that bonds to the plastic and stays until it wears through. Makers' own numbers:

  • Dressing

    a single application typically lasts several weeks, one maker says, with regular reapplication
  • Trim coating

    up to 2 years on two makers' product pages
  • Wash-count guarantee

    200 washes on one coating, refund or replacement if it doesn't make it
  • Cure

    1 hour on that product; 12 hours before weather on another

Those years are maker claims, not test results, and a coating on trim that wasn't stripped of old dressing won't last anywhere near them. The cost side is thin: we found no car-media or cost-guide price for trim restoration on its own. Trim coatings list at about $35 for a 15 ml bottle, enough for a small sedan's trim on that maker's sizing, so the price you're paying for is the scrubbing and the hours. Kent pricing is the shop's call once it has looked at the pieces.

Trim is usually quoted alongside other work. Cloudy headlights are their own job, on the headlight restoration page. If the paint is getting a coating too, ask whether the trim is in that price or a separate line, and whether it's restored first or only coated.

Ready to get started in Kent?

Tell us about the job and a local ceramic coating shop will get back to you with a free estimate.

Get a free ceramic coating estimate

Free for car, truck, boat and RV owners. One local shop contacts you.